Filter
Top Products
2 – Part names and functions
10 TASCAM GA-30CD
p TEMPO key
Press this key to turn tempo control ON and OFF.
The indicator above the key lights when ON and
blinks when settings are being adjusted. Press and
hold this key to open the Tempo setting menu. (See
“Setting the tempo” on page 16.)
a KEY key
Press this key to turn key adjustment ON and OFF.
The indicator above the key lights when ON and
blinks when settings are being adjusted. Press and
hold this key to enter the Key setting menu. (See
“Adjusting the key” on page 17.)
s VSA key
Press this key to activate Variable Speed Audition
(VSA). The indicator above the key lights when
ON. When ON, VSA keeps the original pitch of the
music even when the tempo is changed.
d TIME/ESC key
When a time is displayed, press this key to change
the time display mode.
When using a menu, press this key to return to the
time display.
f Track skip and search keys (∆/µ, ˚/≤)
Press ∆/µ and ˚/≤ during CD playback to
skip to previous or later tracks.
Press these keys when playback is stopped to select
a track to play. (Press PLAY (¥) to start playback.)
To fast forward during CD playback, press and hold
˚/≤. To rewind, press and hold ∆/µ.
Fast-forward and rewind speed gradually increases
as long as the key is held down.
g STOP (ª)/MTRO key
Press to stop CD playback. Press and hold this key
to open the Metronome menu. (See “Using the
metronome” on page 18.)
h PLAY/PAUSE key (¥/π)
Press to start playback of a stopped or paused CD or
pause a playing CD.
j EFFECT Knob 1
Adjust the first parameter of the selected effect. (See
“Using effects” on page 14.)
k EFFECT Knob 2
Adjust the second parameter of the selected effect.
(See “Using effects” on page 14.)
l EFFECT LEVEL Knob
Adjust the amount of the effect or the feedback level
of the selected effect.
; Effect selection keys (§, ¶)
Use these to select one of the effects – delay,
panning delay, flanger, phaser, chorus, tremolo,
auto-wah or pitch shifter. The indicator lights next
to the selected effect. When no effect is selected, no
indicators light.
zBank selection key
Select from the effects preset banks. (See “Changing
banks” on page 15.)
The indicator lights next to the selected bank.
x OUTPUT key
Press this key to select the effect signal output –
the center speaker, the side speakers or all three
speakers. Each time you press this key, the output
destination setting changes and one or both of the
indicators (CENTER, SIDE) lights to show the
selected speakers.
Effects Section
j
k l
z
; x