Tascam GA-30CD Stereo Amplifier User Manual


 
2 – Part names and functions
TASCAM GA-30CD 11
c ~ IN
Use the supplied power cord to connect the amp
to an AC power outlet. Confirm that the voltage
matches that marked on the rear panel of your
GA-30CD amp.
Rear panel
CD Trainer LCD
MENU
b
v
n
m
.
,
/
#
$
!
@
v PLAY indicator
Appears during playback.
b PAUSE indicator
Appears when playback is paused.
n REMAIN indicator
When no track number appears, this indicates that
the remaining time of the entire CD is being shown
on the time display. When the track number also
appears, this indicates that the remaining time of
the currently playing track is being shown. (See
“Changing the time display mode” on page 16.)
m TUNER indicator
Appears when the tuner is in use. (See “Using the
tuner” on page 18.)
, SET UP/MENU indicator
Blinks when the Setup menu is active. (See
“Changing settings” on page 19.)
NOTE
US models show the indicator MENU in this position
while European models show the indicator SETUP. The
function is the same.
. Tuning meter
Shows pitch during tuning. The center is the correct
pitch. The more the indicator lights to the left, the
flatter the pitch and the more it lights to the right the
sharper the pitch.
/ LOOP indicator
Appears when set to loop playback (ALL/SGL). (See
“Repeat playback of a selected loop” on page 16.)
! 1
Appears when set to single (SGL) repeat playback.
@ I-O
Blinks when the loop repeat IN point is set and
lights when the OUT point is set.
# Track number/time display
Shows the currently selected track number (above
TRACK) and time during playback in minutes (M) and
seconds (S). Also provides information when making
various settings.
$ ,
Shows pitch when key adjustment is ON.
NOTE
Some models show these symbols as white on a
black background. The function is the same.
c