Filter
Top Products
2. Functions and Controls English
TASCAM CD-X1700 DUAL CD PLAYER 9
Pressing and holding the SHIFT key while
pressing this key selects the parameter display
mode.
TEMPO ∑ KEY ∑ TAP ∑ BPM (∑ DIR).
t SCRATCH key
Turns the scratch play mode on and off. When
scratch play mode is on, this key lights and scratch
can be performed by Jog wheel. (∑ page 15)
y BRAKE key
Turns the brake function on and off and sets the
brake time using the Jog wheel. (∑ page 15)
Turns the relay play on and off. (∑ page 20)
u REVERSE key
Changes the playback direction between forward
and backward. (∑ page 17)
i SEARCH key
Turns on or off the Search function on the Jog
wheel. When this key is lit, the Jog wheel acts as
a search dial.
After 5 seconds without search operation, the unit
will exit the search mode automatically.
o Track Skip keys
Use these to perform track searches.
p CUE key
Locates to the cue point, then pauses.
Stutter play can be performed with this key.
(∑ page 12)
Selects the CUE key’s operation mode. (∑ page
12)
a PLAY/PAUSE key
Changes the playback mode between playback and
pause.
The light stays on solid in playback mode and
flashes in pause mode
s Jog Wheel
The following functions can be controlled by the
Jog wheel.
• Search
• Pitch Bend
• Scratch
• Brake time
• Key control
• Preset menu
•Effect parameters
• Sampler tempo/level
• Program edit
•Track memory number select
d FX SYNC key
Turns on and off synchronization of the effect time
with the MPB. (∑ page 16)
f FLANGE key
Turns the Franger effect on and off. (∑ page 16)
g ECHO key
Turns the Echo effect on and off. (∑ page 16)
h FILTER key
Turns the Filter effect on and off. (∑ page 16)
j FLASH / RECALL / DEL key
Turns the flash start mode on and off. (∑ page 12)
Recalls the track memory data. (∑ page 19)
Deletes the current selected song from the program
list. (∑ page 22)
k SET / MEMO / INS key
Set the cue points with CUE 1-3. (∑ page 12)
Memorizes the track memory data (∑ page 18)
Adds the current selected song into the program
list. (∑ page 22)
l CUE 1-3 keys
Depending on the setting, these keys locate to cue
points, flash start from cue points (default), or
stutter play from cue points. (∑ page 12)
; LOOP, A, and B keys
Sets or erases the loop points, or engages or
disengages the loop playing. (∑ page 13)
z SAMPLE keys
This key lights when sample playback takes place
and flashes when sample recording takes place.
Press and hold this key and press the IN key to
enter reverse sample playback mode, and press and
hold this key and press the OUT key to enter loop
sample playback mode. (∑ page 17)