Filter
Top Products
English 4. More advanced operation
18 TASCAM CD-X1700 DUAL CD PLAYER
Sampler Loop
Pressing and holding the SAMPLE key then
pressing the OUT key turns the sampler loop play
on and off. When sampler loop play is activated,
LOOP LED will light.
Sampler Reverse
Pressing and holding the SAMPLE key then
pressing the IN/ß key turns the sampler reverse
play on and off. When sampler reverse play is
activated, REV LED will light.
Sampler pitch control
Pressing and holding the SAMPLE key then using
the Jog wheel changes the playback pitch of the
sampler.
The pitch control range is +/-32% in 0.1% steps.
Sampler output level
Pressing and holding the IN key then using the Jog
wheel adjusts the sampler output level. The
sampler output level can be set from 0 (mute) to
100 ( default level).
Recall the sampling data
If the sampling points are memorized in the current
track memory, pressing the OUT key more than 1.5
seconds starts sampling automatically.
4-7. Track Memory / Recall
The CD-X1700 can memorize the various
playback settings of current selected track up to
100 tracks of memory in each 5 banks (A to E).
You could use each bank for a different player or
use the other bank for a different setting for a track,
for example.
Track Memory
1. Select the memory bank (A to E) by pressing and
holding the SHIFT key then pressing the
TEMPO/BANK key.
2. Enter the track memory mode by pressing and
holding the SHIFT key then pressing the
SET/MEMO key.
3. LCD shows the lowest empty memory number.
4. Using the Jog wheel to change the memory
number if necessary.
5. Press the ENTER key. At this time, if there is
stored memory in the selected memory number,
indication is displayed in the LCD.
Pressing the ENTER key overwrites the current
track data. Pressing any other key cancels the
memory operation.