Filter
Top Products
4. More advanced operation English
TASCAM CD-X1700 DUAL CD PLAYER 17
4-5. Reverse play
The CD-X1700 features the reverse play function.
Pressing the REVERSE key changes playback
direction. When playback is reversed, the
REVERSE key will light.
… More than 3 seconds after pausing,
reverse play cannot be performed.
… In the reverse play mode, flash start, cre-
ating the looping, and auto cue func-
tions do not work.
4-6. Sampler
The CD-X1700 includes eight seconds sampler on
each player.
Sampling
… Make sure the IN/ß and OUT keys are
not lit. If the sampler has sampled audio
data, erase the audio data first, then
record the audio again.
1. Press the IN/ß key when playing or pausing.
IN/ß key will light and SAMPLE and OUT key
will start flashing.
2. Press the OUT key when playing or pausing.
SAMPLE key will go off and both IN/ß, and
OUT keys will light.
NOTE
NOTE
… If eight seconds elapse, or if the end of
the track is reached without pressing the
OUT key, the end point of the sample
will automatically be set at that point.
Using the A-B loop as a sample source
When you have set up an A-B loop, you can press
and hold the OUT key and press the B key to set A
point of the loop as the start point of the sampler,
and B point of the loop as the end point of the
sample (you cannot operate this when loop
playback is activated).
If the A-B loop is over 8 seconds length , the first
8 seconds will be take as the sample.
Play the sampler
When IN/ß, and OUT keys light, pressing the
IN/ß key starts the sampler from the beginning.
Stop the sampler
When sampler is playing, pressing the OUT key
stops the sampler.
Erasing the recorded sample
Pressing both IN/ß and OUT keys
simultaneously erases the recorded sample. At this
time, IN/ß and OUT keys light off.
NOTE