Filter
Top Products
TASCAM 322 19
Tape : Compact cassette tape C-30/60/90
(Normal/High Position/Metal)
Track Format : 4-track, 2-channel
Head Configuration : 4-track, 2-channel ;
Record/repro combination rotary head
(DECK 1 x1, DECK 2 x1, permally)
Erase head (DECK 1 x1, DECK 2 x1, ferrite)
Motor : DC servo capstan motor (DECK 1 x1,
DECK 2 x1)
DC reel motor (DECK 1 x1, DECK 2 x1)
Tape Speed : 4.76 cm/sec (1.87 ips) or 9.5 cm/sec
(3.74 ips) at HIGH SPEED dubbing
Pitch Control : approx. +/– 10 %
Line Input - RCA jack
Nominal Input Level : –10 dBV (0.3V)
Minimum Input Level : –18 dBV (0.1V)
Input Impedance : 24k ohms
Line Output - RCA jack
Nominal Output Level : –5 dBV (0.6V)
Output Impedance : 1.5k ohms
Cascade Output - RCA jack
Nominal Output Level : –10 dBV (0.3V)
Output Impedance : 100 ohms
Headphone Output - 1/4" jack
Output Power : 7 mW max./32 ohms
Bias/Erase Frequency : 100 kHz
Repro Equalization :
3180 µs + 70 µs (High Position/Metal)
3180 µs + 120 µs (Normal)
Reference Record Level :
250 nWb/m = 0 VU (315 Hz) (JEITA)
EXT CONTROL : 3.5 mm mini jack
REMOTE IN (FROM RC-322A) : 2.5 mm mini-mini
jack
REMOTE IN (SERIAL) : RC-232C
Power Requirements :
USA/Canada/General Export Model :
120/230 V AC (50-60 Hz), switchable
U.K./Europe : 230 V AC (50 Hz)
Australia : 240 V AC (50 Hz)
Consumption : 33 Watts
Dimensions : ( See drawings below)
Weight : 7.8 kg (17.19 lbs)
Typical Performance
Speed Accuracy : Less than +/–3.0%
Wow and Flutter : Less than 0.15% WRMS
Fast Winding Time :
120 sec. (approx.) with C-60 cassette
Frequency Response, Overall (JEITA, without NR) :
63 Hz to 18 kHz, +/–3 dB (Metal)
63 Hz to 16 kHz, +/– 3 dB (High Position)
63 Hz to 16 kHz, +/–3 dB (Normal)
Distortion : Less than 2.5%, at 1kHz,
l60 nWb/m (Metal)
Signal-to-Noise Ratio :
59 dB (without NR, ref. 3% THD, WTD) (Metal)
69 dB (with Dolby-B NR, CCIR ARM) Noise level
79 dB (with Dolby-C NR, CCIR ARM) Noise level
Channel Separation :
Better than 30 dB (at 1 kHz)
Erase Ratio : Better than 65 dB (at 1 kHz)
«Specifications and features subject to change
without notice or obligation.
Specifications
Dimensional Drawings