Filter
Top Products
D13841.08
10.2007
39
Table of
Contents
Trademarks &
Copyright
Patents &
Disclaimers
Safety/
Environmental
To Get You
Up and Going
Using the 3G
Gateway
Viewing the
System Status
Configuring
the 3G Gateway
Maintenance
& Upgrade
Services
Dial Plan
Examples
Contact
Information
TANDBERG 3G Gateway
USER GUIDE
Configuring
the 3G Gateway
TANDBERG 3G GATEWAY
USER GUIDE
To configure the miscellaneous
settings on the 3G
Gateway, select the System
Configuration
item.
Configuration. To change the system name of
the 3G Gateway, enter the new system name
in the System Name field.
Note that when the Authentication ID in the
H.323 link is left empty, the System Name
field will be used to register the 3G Gateway
with the gatekeeper in stead. In case both the
Authentication ID field and the System Name
field are left empty the 3G Gateway can not be
registered with the gatekeeper.
Services. The different IP services on the 3G
Gateway – Telnet, SSH, HTTP and HTTPS, can
be disabled independently to prevent access
to the system. Moreover, with Session Time
Out, a maximum login time can be set.
External Manager settings. To enable
cooperation between the 3G Gateway and an
external TANDBERG Management System (TMS)
enter both its IP address and its path.
System
Save. When ready to store
the new settings, press
Save. These settings will
take effect when the system
has been restarted.
Restart. This button will
restart the 3G Gateway.
Any changes made in the
IP Configuration of the 3G
Gateway will take effect
after the system has been
restarted.