Filter
Top Products
14
Insert
Input
All microphones with balanced floating output, i.e. also microphones
equipped with tubes can be used when the phantom voltage is switched
on.
WWAARRNNIINNGG:: IItt iiss eesssseennttiiaall ttoo sswwiittcchh tthhee pphhaannttoomm ssuuppppllyy ooffff iiff ootthheerr ttyyppeess
ooff mmiiccrroopphhoonneess aarree uusseedd..
AA lliinnee ssiiggnnaall ssoouurrccee oorr aann uunnbbaallaanncceedd mmiiccrroopphhoonnee mmaayy oonnllyy bbee uusseedd iiff
tthhee pphhaannttoomm ssuuppppllyy iiss sswwiittcchheedd OOFFFF..
There is a switchable INSERT path between the INPUT stage and the
P
ARAMETRIC stage. The signal can be fed to other sound processing units such
as compressors, limiters, de-essers or reverb units.
The I
NSERT jacks at the rear of the EQ MAGIX are designed as unba-
lanced jacks for S
END and RETURN.
It is also possible to use the microphone preamplifier independently of
the P
ARAMETRIC and VITALIZER stages via the INSERT, by feeding the micro-
phone signal out at the I
NSERT SEND jack, whilst feeding a second signal into
I
NSERT RETURN. This means that two independent signals can be processed
in the EQ MAGIX at the same time.
If there is no signal connected at the I
NSERT
jacks and the I
NSERT
switch is
activated, the microphone signal is maintained, as the signal flow is not
interrupted until there is a jack plugged into the S
END
and R
ETURN
jacks.
N
6