Filter
Top Products
Loudness Maximizer
12
Storing a preset:
Depress Store for1 sec.–
LED flashes;
use Up/Down to select
preset number;
depress Store again –
LED goes out,preset is stored
Applying a preset:
Depress Apply for1 sec –
LED flashes;
use Up/Down to select
preset number;
depress Apply again –
LED goes out,preset is applied
Operation safety:
Presets can not be changed
by accident
The Loudness Maximizer allows you to store up to 99 presets,
which can be changed by MIDI program change command.
If you want to store a new adjustment, depress Store for one
second.The LED starts to flash indicating that the Store mode has
been activated. The LC-display now shows the values of the
presets (including the BOOST function) before the Loudness
Maximizer was switched off the last time. Use Up and Down to
select a new preset number.The status-LED flashes shortly to indi-
cate that the input (depressing Up or Down) is accepted. Keeping
Up or Down depressed will let you jump through the preset list in
steps of 5 presets. Once a new preset location is found depress
Store again. The Store LED goes out. The preset is stored at the
new location.
In case you want to quit the Store mode without storing the
new adjustments simply press Apply.
If you want to apply various presets depress Apply for one
second. The Apply LED starts to flash indicating that the Apply
mode is activated. You can step through the preset list with Up
and Down.Once you have a preset that you want to apply depress
Apply again.The Apply LED goes out indicating that the preset is
applied.
In case you want to quit the Apply mode without applying the
new preset simply press Store.
To increase operation safety it is impossible to apply presets by
simply depressing Up or Down.The Up and Down status-LEDs will
not flash indicating that the input is not accepted. You have to
depress Store or Apply for one second in order to activate the Up
and Down buttons.
Depressing Store and Apply simultanouesly for about one
second gets you into a hardware dialogue, called INFO. The LC-
display shows status informations of the digital data stream.With
Up/Down you will jump from one page to the next or previous.If a
selection is provided use Apply to select.
Info
9
8
Presets