Sound Performance Lab 2710 Stereo System User Manual


  Open as PDF
of 16
 
13
RackPack
Link Cable Installation (Top View)
Two modules supporting the LINK feature (i. e. Transient Designer & DynaMaxx) can be run 
as stereo pairs. In LINK mode, the master module controls the slave module and allows a 
coherent processing of stereo programs over both channels. Besides coherent stereo oper-
ations the LINK mode offers further interesting applications, please refer to the individual 
manuals of the modules for further details.
IMPORTANT: You have to specify the master or slave conguration of a module before you t
a module into the RackPack frame. The module manuals explain how to congure a module
for master or slave mode.
All modules supporting LINK mode have a 10-pin-socket on the top of their circuit board. A 
at ribbon cable with two 10-pin-connectors is part of the module’s scope of delivery.
Plug one of the two multi pin connectors of the ribbon cable into either one of the multi-pin 
sockets of the modules to be connected. Make sure that the connections are safe by plugging 
the connector completely into the socket.
IMPORTANT: Only pull or push the connector, never the cable! Otherwise you risk to damage
the cable. Subsequent damages can affect one or more modules!
Link Cable Installation
Fitting Modules
'MBUSJCCPODBCMFXJUIFJHIUQMVHT
UPQPXFSUIFNPEVMFT
'MBUSJCCPODBCMFXJUIUXPQMVHTUPDPOOFDU
UXPNPEVMFTGPS-*/,NPEF
.0%6-& .0%6-& .0%6-& .0%6-&
 previous next