Filter
Top Products
– 14 –
cam
cam
holder (guide T)
guide (disc T)
fixed scre
w
guide (disc T)
disc
A
B
guide (disc T)
disc
holder
(guide T)
tapering screwdriver
holder (guide T)
GUIDE (DISC T) ALIGNMENT
(2) Check that the state is as shown in
the figure.
(4) Move the holder (guide T) with a tapering screwdriver,
and set the position of the guide (disc T) to A:B=1:1.
(3) Loosen the fixed screw by about 60 °.
(1) Rotate the cam and adjust to the posi-
tion shown in the figure.