Filter
Top Products
9
K615S-21 07-12
Locating a Specific Playback Position
— Memory Play
Returning to the memorized position while the unit
is stopped — Memory Stop
If you press only the 0 button when the MEMORY
indicator is on and the unit is stopped, the tape rewinds and
then stops when the counter reaches 0.00.
Be sure that the unit is stopped before turning the Memory
Stop function on, otherwise the Multi-AMS function will
operate.
To turn off the Memory Play function
Press the MEMORY button, so that the MEMORY indicator
disappears.
Note on Memory Play/Stop
The tape acutually rewinds to slightly short of 0.00.
Do not turn off the power while using the counter
Turning the power off, then on again resets the counter to
0.00.
The Accuracy of the Linear Counter
Since the counter is not a digital clock, it will differ from the
actual elapsed playback or recording time by a few minutes,
depending on such factors as tape length and hub size.
1 Press MEMORY to turn on the Memory
Play function.
2 Press RESET to reset the counter at the
position to be memorized.
The position is memorized.
3 While holding down · , press 0 to
return to the memorized position.
Memorizing and Locating a Specific
Playback Position
The Memory Play function allows you to use the counter to
record a specific position on a cassette for fast relocation and
automatic playback later.
RESET MEMORY
MEMORY
RESET MEMORY
MEMORY
·0
→
POWER
ON
1
3
2
BALANCE
LR
•
CALIBRATION
COUNTER
RESET MEMORY
PAUSE
P
REC MUTE
R
REC
rp0
·
)
0 AMS )
MPX FILTER
ON OFFØø
REC LEVEL
0
1
2
3
4
5
6
7
8
9
10
•
•
•
•
•
•
•
•
•
•
OFF
DOLBY NR
B
C
•
•
•
MONITOR
•
S
POWER
REC LEVEL
– +
•
BIAS
– +
•
HEADPHONES
§
EJECT