Filter
Top Products
8
K615S-21 07-12
Locating a Selection
— Multi-AMS (Automatic Music Sensor)
Changing the indicated number of selections to be
skipped
Press the 0 or ) button at any time, even during Multi-
AMS operation.
The Multi-AMS number may change as you are
setting it
due to the detection of blank spaces as the unit bigins to
fastwind.
The Multi-AMS may fail to detect the start of a
selection in the following cases:
•If you press the ) button immediately before the
selection or the 0 button immediately after the start of
the selection.
•If there is noise in the space before the selection.
•If the space before the selection is less than four seconds
long.
The Multi-AMS will treat the following as blanks:
•A long pause in the music
•A passage of low frequencies or very low volume
•A gradual increase or decrease in volume
Through its ability to detect the blank space between selections, the Multi-AMS
function allows you to skip up to 30 selections while fast forwarding or reversing to
the beginning of a specific selection.
Previous
selection
Next
selection
Current
selection
•Each time the unit
detects a blank space,
the indicated Multi-
AMS number
decreases by one.
•The ( indicator flashes during Multi-AMS operation.
•When the beginning of the specified selection is
reached, the counter indication appears again and
playback automatically restarts.
: Beginning of the selection
During playback, press ) or 0 as many
times as the number of selections to be
skipped.
For selections after the current one: Press )
the required number of times.
For selections before the current one: Press
0 the required number of times*.
* Pressing 0 once locates the beginning of the
current selection.
) 0
POWER
ON
→
BALANCE
LR
•
CALIBRATION
COUNTER
RESET MEMORY
PAUSE
P
REC MUTE
R
REC
rp0
·
)
0 AMS )
MPX FILTER
ON OFFØø
REC LEVEL
0
1
2
3
4
5
6
7
8
9
10
•
•
•
•
•
•
•
•
•
•
OFF
DOLBY NR
B
C
•
•
•
MONITOR
•
S
POWER
REC LEVEL
– +
•
BIAS
– +
•
HEADPHONES
§
EJECT
) [ ] ) [ ]0 [ ] 0 [ ]
(