Filter
Top Products
11
K615S-21 07-12
5 Turn REC LEVEL to adjust the recording
level.
6 Turn BALANCE to adjust the balance.
See “Adjusting the Recording Level” on page 12.
7 Restart the program source, if required.
8 Press P or · to start recording.
To stop recording
Press the p button.
or
If playback starts instead of recording when you
press r
The record-protect tab for that side has been removed. To
record on this cassette, cover the hole with plastic tape.
(See “Protecting a Recording” on page 12.)
Selecting MONITOR mode is unnecessary
The unit automatically enters source mode and the SOURCE
indicator lights up. If you wish to monitor the recorded
sound, press the MONITOR button to select TAPE mode.
Checking the recording time on a tape
To check the remaining recording time on a tape:
1 Press the RESET button to reset the counter to 0.00.
2 Press the ) button to advance the tape to its end. The
number on the counter shows the approximate
recording time.
To check the total recording time of a tape, first rewind the
tape to its beginning, then follow the same steps as above.
(See “The Accuracy of the Linear Counter” on page 9.)
REC LEVEL
0
1
2
3
4
5
6
7
8
9
10
BALANCE
L
R
PAUSE
P
·