Sony TA-MR2ES Stereo Amplifier User Manual


 
9
US
Setting up the amplifier
SONY TA-MR2ES (US) 2-514-603-12(1)
If you install the amplifier in a closed cabinet, install two
small box fans in the cabinet to provide continuous
ventilation.
Note
Attach box fans also if you connect low-impedance speakers (less
than 8 ohms nominal).
Using rack-mount brackets
You can also mount the amplifier into a rack. Make sure
that you measure the space needed before mounting.
1 Install the rack-mount brackets onto the amplifier
with the supplied screws as shown below.
Make sure that the rack-mount brackets are installed
securely.
2 Mount the amplifier into the rack as shown below.
Make sure that the amplifier is installed securely.