Sony TA-MR2ES Stereo Amplifier User Manual


 
18
US
Other Information
SONY TA MR2ES (US) 2 514 603 12(1)
Specifications
Continuous average power output (FTC):
35 W per channel min. RMS at 8 ohms,
both channels driven from 20 Hz to
20 kHz with no more than 0.09 %
THD.
40 W per channel min. RMS at 4 ohms,
both channels driven from 20 Hz to
20 kHz with no more than 0.09 %
THD.
Frequency responce: 5 Hz – 100 kHz + 0.5/2 dB
Residual noise (A-weighted):
150 µV or less
Channel separation (1 kHz/10 kHz):
(input 4.7 k ohms terminated)
60 dB/45 dB
Signal-to-noise ratio: 94 dB (A-weighted filter, 150 mV input)
Audio input
Sensitivity: 150 mV
Impedance: 50 k ohms
Audio output
Voltage: minimum 2 V without clipped
Impedance: 1 k ohms
S/N: 102 dB (A-weighted filter, 2 V output)
General
12V trigger IN: accept 10 ~ 12 V of trigger
12V trigger OUT: 300 mA max
IR input: accept up to 40 kHz IR modulation
frequency
IR output: buffered, 5 V
Power requirements: 120 V AC, 60 Hz
Power consumption: 100 W
Dimensions: 430 67 350 mm (w/h/d)
Mass: 6.5 kg
Design and specifications are subject to change without notice.
01US06CH4-U.p65 11/30/04, 1:09 PM18