Filter
Top Products
56
RS-232 Interface
When the personal computer is connected to the RS-
232C connector, the transmission speed (baud rate)
can only be set using the GENERAL SET menu.
1 Set the RS-485/RS-232C selector at the rear to
RS-232C.
2 Turn on the power of the equipment to be used.
3 Press MENU and MENU
V
until “4” of the MAIN
MENU flashes.
4 Press MENU
B
.
The GENERAL SET menu appears.
5 Press
MENU V
to move the flashing to BAUD
RATE and set the baud rate (19200, 2400, 4800 or
9600 bps) by pressing
MENU + or –
.
6 Press SEARCH/AUDIO ON to return to the
normal display.
C OC JUS
APC
THREAD CHECK
T
/
D SEARCH
000
ON
OFF
CONVENTION
PB S–VHS AUTO
19200BAUD RATE
SELECT : DATA SET :
+
/
– RETURN : MENU
<
NEXT PUSH
>
GENERAL SET
TAPE
TAPE IN
TAPE END MODE
MODE
TAPE USED COUNT
CLOCK ADJUST
APC
THREAD CHECK
T
/
D SEARCH
T–120
STOP
REW
OFF
01:00
ON
OFF
CONVENTION
PB S–VHS AUTO
19200
SELECT : DATA SET :
+
/
– RETURN : MENU
<NEXT PUSH >
BAUD RATE
REC MODE SP
RS-232C/RS-485 Interface