Filter
Top Products
17
Setting the Buzzers
You can turn on/off three types of buzzers:
• ALARM IN buzzer: beeps while it receives an
alarm signal. (See “Alarm Recording” for more
information on page 35.)
• TAPE END buzzer: beeps when the tape reaches its
end.
• KEY IN buzzer: beeps when you press a button.
1 2-4 5
1 Turn on the power of the equipment to be used.
2 Press MENU and MENU
V
until “2” of the MAIN
MENU flashes on the monitor screen.
3 Press MENU
B
.
The DISPLAY SET/BUZZER/SW OUT menu
appears.
4
Press MENU V to move the flashing to the setting
of
each ALARM IN, TAPE END and KEY IN,
and
set to ON or OFF by
pressing MENU + or –
.
5 Press SEARCH/AUDIO ON to return to the
normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU
V
until “NEXT PUSH
B
” flashes and
press MENU
B
.
DISPLAY SET DATE ON
BUZZER ALARM IN ON
TAPE END ON
KEY IN ON
SW OUT MODE FIELD
TIMING 01
TIME ON
SPEED ON
ALARM ON
WARNING ON
DAYLIGHT SET
CLOCK SET
1.
LANGUAGE
2. DISPLAY SET
3. ALARM SET
/
1SHOT REC
4. GENERAL SET
5. TIMER SET
6. HOLIDAY SET
7. POWER FAILURE
/
DEW
BUZZER
8. ALARM DATA
SELECT : NEXT : RETURN : MENU
USED HOUR
SW OUT
<
MAIN MENU
>
DISPLAY SET DATE ON
BUZZER ALARM IN ON
TAPE END ON
KEY IN OFF
SW OUT MODE FIELD
TIMING 01
2H MODE ON
TIME ON
SPEED ON
ALARM ON
WARNING ON
SELECT : DATA SET :
+
/
– RETURN : MENU
<NEXT PUSH >