Filter
Top Products
49
This VCR is equipped with S-VHS ET format, so that
when you play back a tape, the VCR automatically
detects the S-VHS ET format and gives you a high
quality picture.
You can set to activate this function on the GENERAL
SET menu.
1 2-5 6
DAYLIGHT SET
CLOCK SET
1.
LANGUAGE
2. DISPLAY SET
3. ALARM SET
/
1SHOT REC
4. GENERAL SET
5. TIMER SET
6. HOLIDAY SET
7. POWER FAILURE
/
DEW
BUZZER
8. ALARM DATA
SELECT : NEXT : RETURN : MENU
USED HOUR
SW OUT
<
MAIN MENU
>
1 Turn on the power of the equipment to be used.
2 Press MENU and MENU
V
until “4” of the MAIN
MENU flashes on the monitor screen.
3 Press MENU
B
.
The GENERAL SET menu appears.
4 Press MENU
V
to move the flashing to the setting
of PB S-VHS.
GENERAL SET
TAPE
TAPE IN
TAPE END MODE
MODE
TAPE USED COUNT
CLOCK ADJUST
APC
THREAD CHECK
T
/
D SEARCH
T–120
STOP
REW
OFF
01:00
ON
OFF
CONVENTION
PB S–VHS AUTO
19200
SELECT : DATA SET :
+
/
–
RETURN : MENU
<NEXT PUSH >
BAUD RATE
REC MODE SP
5 Set to AUTO or OFF by pressing
MENU + or –.
AUTO: the VCR automatically detects S-VHS ET
format and plays back the tape (normally set to
this mode).
OFF: the VCR plays back tape using VHS format.
When a tape recorded using VHS format is
played back, if the picture becomes noisy, set
PB S-VHS to OFF.
Note
When the tape is ejected, the setting returns to AUTO.
6 Press SEARCH/AUDIO ON to return to the
normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU
V
until “NEXT PUSH
B
” flashes and
press MENU
B
.
Playback in S-VHS ET Format