Filter
Top Products
7
Getting Started
Mains lead hookup
Connect the mains lead to a wall outlet after
completing all of the previous connections.
Selecting the German
display
You can select either an English or a German
language display. The factory preset language
is English. To change the display to German,
follow the steps below.
1 Press POWER to turn off the tuner.
2 While pressing down the numeric
button 2, press POWER to turn on the
tuner.
“Deutsch” appears in the display.
To return to the English display
Repeat this procedure.
“English” appears in the display.
Storing FM stations
automatically
(Auto-betical Select)
(European model only)
With Auto-betical Select you can automatically
store up to 30 FM and FM RDS stations in
alphabetical order without redundancy.
Additionally, Auto-betical Select only stores
the stations with the clearest signals. If you
want to store FM or AM (MW and LW)
stations one by one, see “Presetting radio
stations” on page 8 and “Receiving broadcasts”
on page 9.
To a wall outlet
1 Press POWER to turn on the tuner.
2 Turn on the amplifier and select the
TUNER mode.
3 Press AUTO BETICAL SELECT.
“Yes” and “No” appear in the display.
4 Turn TUNING/SELECT to select “Yes”.
5 Press AUTO BETICAL SELECT again.
The tuner scans and stores all the FM and
FM RDS stations in the broadcast area.
For RDS stations, the tuner first checks for
stations broadcasting the same programme,
then stores only the one with the clearest
signal. The selected RDS stations are sorted
alphabetically by their Programme Service
name, then assigned a two-character preset
code. For more details on RDS, see page 12.
Regular FM stations are assigned two-
character preset codes and stored after the
RDS stations.
Tip
To change the location of, or erase, a preset station,
see “Organizing the preset stations” on page 11.
Notes
• If you move to another area, repeat this procedure
to store stations in your new area.
• For details on tuning stored stations, see page 8.
• The FM MODE setting is also stored along with the
station.
• If you move the antenna after storing stations using
Auto-betical Select, the stored settings may no
longer be valid. If this happens, store the stations
again.
ANTENNA
OUTPUT
EON CONTROL
FM
y
75Ω COAXIAL
R LOUT
AM