Filter
Top Products
Getting Started
5
GB
Check that you received the following items
with the tuner:
• Audio cord (1)
•AM loop aerial (1)
• FM wire aerial (1)
• DAB wire aerial (1)
• Remote commander (1)
• R6 (size AA) batteries (2)
Before you get started
• Turn off the power to all components before
making any connections.
• Do not connect the AC power cord until all of
the connections are completed.
• Be sure to make connections firmly to avoid
hum and noise.
• When connecting an audio cord, be sure to
match the colour-coded pins to the
appropriate jacks: White (left) to White; and
Red (right) to Red.
AM aerial hookups
This section describes how to connect the
supplied AM loop aerial to the AM ANTENNA
terminals. For the specific location of the
terminals, see the illustration below.
What will I need?
• AM loop aerial (supplied) (1)
1 Unwrap 2 lengths of the braided lead
wire from around the frame of the
aerial. Be careful to unwrap only the
braided section of the lead wire. Do not
unwrap more than 2 lengths of the lead
wire. Also, be careful not to unbraid the
lead wire.
Getting Started
Unpacking
Hooking up the system
AM ANTENNA
continued