Filter
Top Products
39
GB
D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB03CON_STR-DG910-CEL.fm
masterpage: Right
STR-DG910
3-094-430-31 (1)
Getting Started
8: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2 Press MENU.
“1-LEVEL” appears on the display.
3 Press or b to enter the
menu.
4 Press V/v repeatedly to select
“T. TONE”.
5 Press or b to enter the
parameter.
6 Press V/v repeatedly to select
“T. TONE Y”.
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround back right*
t Surround back left* t Surround left
t Sub woofer
* You will only hear the test tone from the
– surround back left and right speakers when
surround back speakers are set to “DUAL”.
– surround back left speaker when surround
back speakers are set to “SINGLE”.
7 Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see “Adjusting the level
(LEVEL menu)” (page 49).
Tips
•To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
•The adjusted value are shown on the display
during adjustment.
8 Repeat steps 1 to 6 to select
“T. TONE N”.
You can also press any input buttons.
The test tone turns off.
TUNING –
MUTING
TV VOL
MASTER VOL
TV CH
PRESET
GUIDE DISPLAY
RETURN/
EXIT
VIDEO 1 VIDEO 2 VIDEO 3 DVD
SAT TV TUNER
2CH A.F.D. MOVIE MUSIC
SA-CD/CD
AUX DMPORT RECEIVER
MEMORY
.
>
xX
MENU
H
CLEAR
>10
-
/
--
<
<
DVD
23
456
789
ENTER
0/10
1
AUTO CAL
B
V
v
B
SYSTEM S ANDBYT
FM MODE D.TUNING
REPLAY ADVANCE
SLEEP
OPTIONS
TOOLS
DISC SKIP
TUNING
+
m
M
1
MASTER
VOL +/–
3-6
2
Input
buttons
continued