Filter
Top Products
19
GB
D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB03CON_STR-DG910-CEL.fm
masterpage: Right
STR-DG910
3-094-430-31 (1)
Getting Started
3b: Connecting the video components
This section describes how to connect your
video components to this receiver. Before you
begin, refer to “Component to be connected”
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to “4: Connecting the antennas” (page
30).
Component to be connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Notes
•Connect image display components such as a TV
or a projector to the HDMI OUT or MONITOR
OUT jack on the receiver.
•Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
Converting video signals
This receiver is equipped with a function for
up-converting video signals. For details, see
page 28.
How to connect your
components
Component Page
With HDMI jack 20
TV 22
DVD player/DVD recorder 24
Satellite tuner/Set-top box 26
VCR 27
Camcorder, video game, etc. 27
Video input/output jack to be
connected
Digital Analog
High quality image