Filter
Top Products
40
EN
Settings and Adjustments
Remote Operation of Audio
Sources Without the TV
(illuminated control flasher)
The Illuminated Control Flasher (or flasher) function
allows you to control audio program sources without
using the TV’s on-screen display by using only the
remote and the front panel of the receiver.
When you move the remote (STR-DE905G) or press the
direction control button (STR-DE805G), the indicator
lamps on the front panel light up in succession. These
lamps, let you select and control the operations that
appear in the display on the receiver.
1 Click FUNCTION in the main menu.
The FUNCTION SELECT menu appears.
2 Click SET UP.
3 Click FLASHER ON.
4 Click an audio program source in the FUNCTION
SELECT menu.
5 Click the TV off icon to turn off the TV monitor.
Note
The TV off icon for the flasher function only appears
when you select audio program sources.
6 Move the remote from left to right (STR-DE905G)
or press the left or right side of the direction
control button (STR-DE805G).
Various operations for the selected program
source appear in the display according to the
movement of the remote. The indicator
corresponding to the operation button on the
front panel also lights up.
The operations available for each program source
are shown below.
Program source Operations
DAT/MD = ( + p
CD = ( + p
TUNER PRESET– PRESET +
PHONO No display
TAPE 0 ( ) p
All sources INPUT SELECT, ALL OFF, TV ON,
VOLUME –, VOLUME +, MUTE
7 Click the remote when the operation you want
appears in the display.
To select another program source
1 Click the remote when INPUT SELECT appears in
the display.
2 Move the remote commander from left to right.
The various program sources appear in the display
one at a time. If you select a video program source,
the TV set will turn on automatically.
To cancel the flasher function
Click the remote when TV ON appears in the display,
or select a video component.
Note
If you select “ALL OFF” in the flasher mode, the next
time the receiver is turned on it turns on in flasher
mode. The receiver turns on normally, however, if
there are components set to auto start (see page 41).
Settings and Adjustments
FUNCTION SELECT
EXIT
SET UP
USERSUB
)(0pP=+
EXIT
SET UP
RETURN
AUTO PLAY
FLASHER
AUTO OSD ERASE
FEELING
POINTER ONLY
IR OUTPUT
DEMO
ON OFF