Filter
Top Products
masterpage:Left
lename[E:\SEM_Janet\Revision
D
ata\J9051275_2598516131DB798CEL\2598516131\GB09ADD_STR-DB798-CEL.fm]
62
GB
model name1[STR-DB798]
[2-598-516-13(1)]
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
Sensitivity
Mono: 18.3 dBf, 2.2 µV/75 ohms
Stereo: 38.3 dBf, 22.5 µV/75 ohms
Useable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code CEL, CEK, TW
With 9-kHz tuning scale: 531 – 1,602 kHz
Antenna Loop antenna
Intermediate frequency 450 kHz
Usable sensitivity 50 dB/m (at 1,000 kHz or
999 kHz)
S/N 54 dB (at 50 mV/m)
Harmonic distortion 0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
S-video: Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms
P
B/CB/B-Y: 0.7 Vp-p,
75 ohms
P
R/CR/R-Y: 0.7 Vp-p,
75 ohms
80 MHz HD Pass Through
General
Power requirements
Power consumption
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
397 × 160.5 × 430 mm
including projecting parts
and controls
Mass (Approx.) 13.5 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAP002 (1)
R6 (size-AA) batteries (2)
AC power cord (Except for models of area code TW
(Taiwan)) (1)
Design and specifications are subject to change
without notice.
Area code Power requirements
CEL, CEK 230 V AC, 50/60 Hz
TW 110 V AC, 50/60 Hz
Area code Power consumption
CEL, CEK 290 W
TW 520 W
For details on the area code of the component you
are using, see page 2.
GB01COV_STR-DB798-CEL.book Page 62 Thursday, August 18, 2005 8:59 AM