Filter
Top Products
masterpage:Left
lename[E:\SEM_Janet\Revision
D
ata\J9051275_2598516131DB798CEL\2598516131\GB05SND_STR-DB798-CEL.fm]
30
GB
model name1[STR-DB798]
[2-598-516-13(1)]
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the sub woofer.
Listening to 2 channel stereo
sources (2CH STEREO)
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
Press 2CH.
“2CH ST.” appears in the display and the
receiver switches to the 2CH STEREO mode.
Note
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to the 2 channel stereo
sources using the front left/right speakers and a sub
woofer, set A.F.D. mode to “A.F.D. AUTO”.
Listening to analog audio
(ANALOG DIRECT)
You can switch the audio of the selected input to
the two channel analog input. This function
enables you to enjoy high quality analog
sources. Also see “D.PWR XXX” on page 41.
When using this function, only the volume and
front speaker balance can be adjusted.
1 Turn INPUT SELECTOR to select the
input you want to listen to in analog
audio.
2 Press DIRECT.
“A. DIRECT” appears in the display and
the analog audio is output.
Press again to cancel the ANALOG DIRECT
function.
Notes
• This function is cancelled when you switch the sound
field (pages 30-34).
• When this function is used, test tone function cannot
be used.
Enjoying Surround Sound
Using only the front
speakers
GB01COV_STR-DB798-CEL.book Page 30 Thursday, August 18, 2005 8:59 AM