Filter
Top Products
Advanced Adjustments and Settings
masterpage:Right
lename[E:\SEM_Janet\Revision
D
ata\J9051275_2598516131DB798CEL\2598516131\GB06ADV_STR-DB798-CEL.fm]
43
GB
model name1[STR-DB798]
[2-598-516-13(1)]
Advanced LEVEL menu
parameters
When “MENU XXX” is set to “MENU EXP.”,
the following parameters are displayed and
adjustable in addition to the LEVEL menu
parameters on page 38.
The initial setting is underlined.
xP. NOISE (Phase noise)
Initial setting: Off
Lets you output the test tone sequentially from two
adjacent speakers.
xP. AUDIO (Phase audio)
Initial setting: Off
Lets you output the front 2 channel source sound
(instead of the test tone) sequentially from adjacent
speakers.
x COMP. XXX
(Dynamic range compressor)
Lets you compress the dynamic range of the sound
track. This may be useful when you want to watch
movies at low volumes late at night.
•OFF
The dynamic range is not compressed.
•STD
The dynamic range is compressed as intended by the
recording engineer.
•MAX
The dynamic range is compressed dramatically.
Tip
Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the dynamic
range information included in the Dolby Digital signal.
“COMP. STD” is the standard setting, but it only
enacts light compression. Therefore, we recommend
using the “COMP. MAX” setting. This greatly
compresses the dynamic range and lets you view
movies late at night at low volumes. Unlike analog
limiters, the levels are predetermined and provide a
very natural compression.
Note
Dynamic range compression is possible with Dolby
Digital sources only.
D.RANGE
GB01COV_STR-DB798-CEL.book Page 43 Thursday, August 18, 2005 8:59 AM