Filter
Top Products
masterpage:Left
lename[E:\SEM_Janet\Revision
D
ata\J9051275_2598516131DB798CEL\2598516131\GB04BSC_STR-DB798-CEL.fm]
28
GB
model name1[STR-DB798]
[2-598-516-13(1)]
A SW: Lights up when sub woofer selection is
set to “YES” (page 17) and the audio signal is
output from the SUB WOOFER jack. This
indicator does not light up during the 2CH
STEREO mode.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D ; DIGITAL EX: “; DIGITAL” lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
“; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to “ANALOG”
(page 37).
E ; PRO LOGIC IIx: “; PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to “NO” and you
select a sound field using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals and for signals with a
sampling frequency of more than 48 kHz.
F DTS-ES 96/24: “DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 37).
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 23–27 for tuner operations.
Note
“RDS” lights up for models of area code CEL,
CEK only.
About the indications in the display
L C R
SL
SB
SBL SBR
SSR
LFE
SP A
DIGITALEX
PRO LOGIC IIx
DTS-ES
NEO:6
RDS
D.RANGE EQ
STEREOMONO
SLEEP OPT COAX
96/24
SP B
;;
MEMORY
DIRECT
SW
qa q; 9
qf
q
g
qsqd
2143567 8
GB01COV_STR-DB798-CEL.book Page 28 Thursday, August 18, 2005 8:59 AM