Filter
Top Products
48
GB
(Models of area code U, CA only)
You can select analog audio signals for output to
the 2nd zone.
1 On the remote, press ?/1 while holding
down USE MODE.
2 Press v/V on the remote to select
“2ND”.
The remote switches to the 2nd zone mode.
For details on the supplied remote, refer to
the operating instructions supplied with the
remote.
3 Turn on the main receiver (this
receiver).
4 Press ?/1 on the remote.
5 Press one of the input buttons on the
remote to select the source signals you
want to output.
The analog audio signals are output. When
you select “SOURCE”, the signals of the
current input are output.
6 Turn on the amplifier in the 2nd zone
and adjust the volume.
Tips
• Even when this receiver is turned off, the receiver in
the 2nd zone remains turned on. To turn off all
receivers, press ?/1 and AV ?/1 on the remote at
the same time (SYSTEM STANDBY).
• Only signals from components connected to the
analog input jacks are output through the 2ND ZONE
OUT jacks. No signals are output from components
connected to only the digital input jacks.
• When “SOURCE” is selected, the signals input to the
MULTI CH INPUT (1, 2) jacks are not output from
the 2ND ZONE OUT jacks even when MULTI CH
INPUT (1, 2) is selected. The analog audio signals of
the current function are output.
2nd zone connections
Listening to the sound in
another zone
CENTER SPEAKER FRONT SPEAKERS
RS232C
IN
VIDEO
OUT
IN OUTIN
TV-SAT DVD MONITOR
IN FRONTOUT
VIDEO
MONITOR
COMPONENT VIDEO
2ND
ZONE
PRE OUT
E
O 1
RL
RL
A
B
OUTTRIGGER OUT IN
IR REMOTE
Y
P
B
/C
B
/B-Y
P
R
/C
R
/R-Y
AC
SUB
WOOFER
AUDIO
OUT
IN OUT
D
EO S-VIDEO
2ND ZONE
2ND
ZONE
OUT
STR-DA2000ES
STR-DB2000
N
X
m
M
.
>
-
x
O
f
F
G
g
Main receiver
Audio/video components
2nd zone
SpeakerSpeaker
Amplifier/Receiver
Remote
IR repeater
(not supplied)
IR repeater
(not supplied)