Sony STR-DB2000 Stereo Receiver User Manual


 
Getting Started
19
GB
Connect the AC power cord to a wall outlet.
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
1 Press ?/1 on the receiver to turn off the
receiver.
2 Hold down ?/1 on the receiver for 5
seconds.
3 While “ENTER to Clear” appears in the
display, press MEMORY/ENTER on the
receiver.
After “MEMORY CLEARING” appears in
the display for a while, “MEMORY
CLEARED!” appears.
The following are reset to their factory
settings.
All settings in the SP. SET UP, LEVEL,
EQUALIZER, CUSTOMIZE, TUNER
and CIS (models of area code U, CA
only) menus.
The sound field memorized for each
input and preset station.
All preset stations.
All index names for inputs and preset
stations.
Note
If “2nd zone on” appears in the display, the initial setup
operation cannot be performed. Turn off the indication
by following the first tip of “Listening to the sound in
another zone” (page 48).
4: Connecting the AC
power cord
S
PEAKERS
L
L
A
B
SUB
WOOFER
AUDIO
OUT
b
To a wall outlet
AC power
cord