Sony STR-DB2000 Stereo Receiver User Manual


 
27
GB
Amplifier Operation
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1 Rotate INPUT SELECTOR to select
“FM” or “AM”.
2 Tune in the station that you want to
preset using Automatic Tuning
(page 25) or Direct Tuning (page 26).
Switch the FM reception mode if necessary
(page 25).
3 Press MEMORY/ENTER.
“MEMORY” appears in the display for a
few seconds. Do steps 4 to 5 before the
display goes out.
4 Press PRESET TUNING + or PRESET
TUNING – to select a preset number.
If you want to switch the memory page,
press SHIFT on the remote.
If “MEMORY” goes out before you select
the preset number, start again from step 3.
5 Press MEMORY/ENTER again.
The station is stored to the selected preset
number.
If “MEMORY” goes out before you press
MEMORY/ENTER, start again from step
3.
6 Repeat steps 2 to 5 to preset another
station.
Tuning to preset stations
1 Rotate INPUT SELECTOR to select
“FM” or “AM”.
2 Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Each time you press the button, you can
select the preset station as follows:
Using the remote
1 STR-DA2000ES:
Move the easy scroll key to select “TUNER”,
then press the key repeatedly to select “FM”
or “AM”.
STR-DB2000:
Press TUNER repeatedly to select FM or
AM.
2 Press D.SKIP/CH/PRESET +/– repeatedly
to select the preset station you want.
Presetting radio stations
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T