Filter
Top Products
30
GB
A SW: Lights up when sub woofer selection is
set to “YES” (page 20). While this indicator
lights up, the receiver outputs the LFE signal
recorded on the disc or generates a low
frequency signal for output to the sub woofer.
This indicator does not light during the 2CH
STEREO mode.
B SLEEP: Lights up when sleep timer is
activated.
C SPA/SPB: Lights up in accordance with the
speaker system being used (A or B). Turns off
when headphones are connected.
D MULTI CH IN 1/2: Lights up when “MULTI
1 DIRECT” or “MULTI 2 DIRECT” is
selected.
E ; DIGITAL (EX): Lights up when Dolby
Digital signals are input. “EX” lights up when
Dolby Digital EX signals are input.When
playing a Dolby Digital EX format disc, be
sure that you have made digital connections
and that INPUT MODE is NOT set to
“ANALOG FIXED” (page 38).
F ; PRO LOGIC (II): Lights up when the
receiver applies Pro Logic processing to 2
channel signals in order to output the center
and surround channel signals. This indicator
also lights when the Pro Logic II Movie/Music
decoder is activated. However, this indicator
does not light if both the center and surround
speakers are set to “NO”.
G DTS (-ES): Lights up when DTS signals are
input. “-ES” lights up when DTS-ES signals
are input. When playing a DTS format disc, be
sure that you have made digital connections
and that INPUT MODE is NOT set to
“ANALOG FIXED” (page 38).
H 96/24: Lights up when the receiver is
decoding DTS 96 kHz/24 bit signals.
I Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 25–28 for tuner operations.
J MEMORY: Lights up when presetting
stations, naming preset stations and inputs, etc.
K D.ASSIGN: Lights up when the digital assign
function is used for the selected input.
L COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal or when INPUT MODE
is set to “COAXIAL FIXED” (page 38).
M OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal, or when INPUT MODE
is set to “OPTICAL FIXED” (page 38).
N NEO:6: Lights up when DTS Neo:6 Cinema/
Music decoding is activated. However, this
indicator does not light if both the center and
surround speakers are set to “NO”.
O EQ: Lights up when the equalizer is activated.
P D.RANGE: Lights up when dynamic range
compression is activated (page 43).
Q Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SBL (Surround back
Left), SBR (Surround back right), SB
About the indications in the display
;
;
MULTI CH IN 1 2
COAX
OPT
DIGITAL EX
DTS -ES
96/24
D.RANGE
MONO
MEMORY
SLEEP
STEREO
PRO LOGIC II
EQ RDS
NEO:6
D.ASSIGN
L.F.E.
LSW
SL
SR
C
S
R
SBSBL
SBR
SP.A SP.B
12 3 876
q
s
q
d
9q
;
q
a
q
f
q
h
q
j
q
k
q
g
45