Filter
Top Products
55
Additional Information
S/N 54 dB (at 50 mV/m)
Harmonic distortion
0.5 % (50 mV/m,
400 Hz)
Selectivity At 9 kHz: 35 dB
At 10 kHz: 40 dB
a) You can change the AM tuning interval to
10 kHz. After tuning in any AM station,
turn off the receiver. Hold down the
TUNING + button and press the 1/u
button. All preset stations will be erased
when you change the tuning interval. To
reset the scale to 9 kHz, repeat the procedure.
Video section
Inputs Video: 1 Vp-p 75 ohms
S-video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
Outputs Video: 1 Vp-p 75 ohms
S-video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
General
System Tuner section:
PLL quartz-locked
digital synthesizer
system
Preamplifier section:
Low-noise NF type
equalizer
Power amplifier
section:
Pure-complementary
SEPP
Power requirements
Models of area code
AU:
240 V AC, 50 Hz
Models of area code SP,
CN:
220 - 230 V AC,
50/60 Hz
Models of area code E2,
E3:
120/220/240 V AC,
50/60 Hz
Power consumption
Models of area code
AU, SP, CN, E2, E3:
220 W
In standby condition:
0.9 W
AC outlets Models of area code
AU, SP:
1 switched, total
100 W maximum
Models of area code
CN, E2, E3:
2 switched, total
100 W maximum
Dimensions 430 × 157.5 × 369 mm
(17 × 6
1
/8 × 14
4
/8 in.)
including projecting
parts and controls
Mass (Approx.)
9.5 kg (20 lb. 16 oz.)
Supplied accessories
See page 4.
For details on the area code of the
component you are using, see
page 3.
The specification measured is under
• 230 V AC 50 Hz condition (models
of area code SP, CN)
• 240 V AC 50 Hz condition (models
of area code AU, E2, E3)
Design and specifications are subject
to change without notice.
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity Mono: 18.3 dBf, 2.2
µV/75 ohms
Stereo: 38.3 dBf, 22.5
µV/75 ohms
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N Mono: 76 dB
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response
30 Hz - 15 kHz
+0.5/–2 dB
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range Models of area code
AU, SP, CN
531 - 1602 kHz (9 kHz
step)
Models of area code E2,
E3
530 - 1610 kHz (10 kHz
step)
a)
531 - 1602 kHz (9 kHz
step)
a)
Antenna Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz
or 999 kHz)