Filter
Top Products
27
Location of Parts and Basic Operations
qh SET UP button
Press to activate the setup mode, then use the cursor
buttons (w;) to select any of the following indications.
You can then make various settings using the jog dial
(ql). For details, see “Adjustment Using the SET UP
Button” starting from page 49.
qj NAME button
Press to activate the name function and enter names
for preset stations and program sources (page 47).
qk ENTER button
Press to enter individual characters for the preset
station and program source names.
ql Jog dial
Turn to adjust the selected speaker level, surround,
and equalizer parameters (etc.).
w; Cursor buttons (
/ )
Press to select various speaker level, surround, and
equalizer parameters (etc.).
wa EQ button
Press to activate the equalizer parameters (page 36).
The indicator on the button lights up and you can
adjust the various equalizer parameters.
ws SURR button
Press to activate the surround parameters (page 34).
The indicator on the button lights up and you can
adjust the various surround parameters (effect level,
wall type, etc.).
wd LEVEL button
Press to activate the speaker level parameters (page
35). The indicator on the button lights up and you can
adjust the various speaker level parameters (front
balance, surround balance, etc.).
wf SPEAKERS button
Press SPEAKERS button to ON. Press again to OFF.
PHONES jack
Connects headphones.
• When you connect the headphones, no sound will come
from the speakers and “SP. OFF” lights up in the display.