Filter
Top Products
Preparation
5
GB
Location and Function of Parts
Front Panel of the
Digital Surround
Processor
PHONES LEVEL
MIN MAX
VIRTUAL
OUTPUT
LRC
LS RS
POWER
ANALOG
DIGITAL
INPUT
CINEMA
MUSIC
EFFECT
DECODE MODE
DOLBY DIGITAL
DOLBY SURROUND
DTS
4
5
6
7
123
8
1 DIGITAL input indicator
ANALOG input indicator
INPUT button
Press to select the input source
(DIGITAL/ANALOG).
2 POWER indicator
This indicator lights green when you
turn on the digital surround processor.
POWER switch
Press to turn on and off the digital
surround processor.
3 CINEMA indicator
MUSIC indicator
EFFECT button (see page 21 for
details)
Press to select the sound field
(CINEMA/MUSIC).
4 Decode mode display (see page 23
for details)
5 PHONES jack (see page 27 for
details)
Connect your headphones to this jack.
Connect the MDR-F1 headphone (sold
separately) for optimum surround effect.
6 PHONES — LEVEL control
Turn to adjust the volume of the
headphones (sold separately) connected
to the PHONES jack.
7 OUTPUT button
Press to select the output mode (OFF/
VIRTUAL FRONT/VIRTUAL
SURROUND).
8 Infrared emitter
Set the emitter in a position so that there
is a straight, unobstructed path to the
sensor.
¡ Preparation
(Continued)