Sony MDR DS5100 Headphones User Manual


 
Operation
13
GB
Connecting the Headphone System
Setup
You can place the digital surround processor in an upright position or on its side.
To use in an upright position:
Use a coin to attach the supplied stand to the bottom of the digital surround
processor.
Rubber supports
/
To use on its side:
Place the digital surround processor so that the four rubber supports are on the
bottom.
Notes
Install the digital surround processor in a location where there are no obstructions between the
processor and headphones when used.
Do not install the digital surround processor in unstable locations, such as on top of the TV. If
the processor falls down, it could cause an injury or be damaged.
If the digital surround processor is placed in an upright position, always attach the stand for
added safety.
If the digital surround processor is placed on its side, the full infrared transmission range may
not be obtained depending on installation conditions.
If the digital surround processor is placed on its side, do not place the digital surround
processor on the side not having the rubber supports.
(Continued)