Filter
Top Products
Playing CDsGetting Started
9
GB
Getting Started
Erasing all data stored in the remote
1 Press MENU.
2 Move the cursor (”) to “Set up” by using the Easy
scroll key, then press the Easy scroll key.
3 Move the cursor to “Memory clear,” then press the
Easy scroll key.
4 If you want to erase all stored data, move the
cursor to “yes,” then press the Easy scroll key.
5 “All memory clear!” appears in the display when
all data is erased.
CDP-CX350
CDP-CX230, etc.
To an AC outlet
To an AC outlet
: Signal flow
To audio input
To LINE OUT
Amplifier
To an AC outlet
COMMAND MODE
To 2ND CD IN
CONTROL A1
To audio output
To CONTROL A1
(Continued)
Connecting Another CD Player
If you have a Sony CD player in which 5, 50, 200, or
300 discs can be inserted and which is equipped with
the CONTROL A1
(or CONTROL A1) jack and the
command mode of that player can be set to CD 3, you
can control that player as the second player with this
unit. After connecting this unit and an amplifier, follow
the procedure below.
Be sure to turn off the power of each player before
making this connection.
Memo s ea r c h
Program play
Program input
Group sel ect
CD1
Player check
Memo l oad i ng
Memo r y c l e a r
Contrast adjust
CD1
Al l memory
clear OK?
yes
no
CD1
Al l memory
clear OK?
yes
no
CD1