35
GB
Storing Information About CDs (Custom Files)
JOG
MENU/NO
·
GROUP 1 – 8 CLEAR
GROUP FILE
SHUFFLE
CONTINUE
Grouping Discs (Group File)
You might find that too many discs make it hard to
find the disc you want. This player has a feature that
lets you classify discs into eight groups. Each disc can
be put into only one group.
Once you classify discs, you can enjoy Continuous,
Shuffle, or Repeat Play within a certain group (Group
Play).
Assigning discs to groups
1 Press CONTINUE or SHUFFLE before you start
playing.
2 Turn the JOG dial to select the disc you want to
assign to a group.
3 Press GROUP FILE.
“Select G1 – G8” appears in the display.
4 Press one of the GROUP 1 – 8 buttons to which
you want to assign the disc.
“GROUP FILE” and the group number appear in
the display and the disc is assigned to that group.
Deleting discs from a group
• To delete a disc from a group
1 Turn the JOG dial until the disc number you want
to delete from the group appears in the display.
2 Press GROUP FILE.
“Select G1 – G8” appears in the display.
3 Press CLEAR.
“GROUP ERASE” appears in the display.
• To delete all discs from a group, press CLEAR while
holding down whichever GROUP 1 – 8 button you
want to clear.
Labeling groups (Group Memo)
You can label the preset group number anything you
like, such as a category, using up to 13 characters.
Note that you cannot store the Group Memo if you
have not assigned any disc to the group.
1 Press MENU/NO.
“MEMO IN ?” flashes.
2 Turn the JOG dial until the group number you
want to label appears in the display, and then push
the JOG dial.
The flashing cursor (
) appears.
3 Turn the JOG dial until the desired character
appears in the display.
The cursor disappears and the first space for the
Group Memo flashes.
As you turn the JOG dial clockwise, the characters
appear in the following order. Turn the JOG dial
counterclockwise to go in reverse order.
(space) A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w
x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , – . / : ; <
= > ? @ _
4 Push the JOG dial to select the character.
The selected character lights up, and the flashing
cursor appears to indicate the next space to be
input.
To make a correction
Press CLEAR and begin again by inputting the correct
characters.
5 Repeat Steps 3 and 4 to input more characters.
See also “Labeling discs on the player” on page 30
for details.
6 Press YES to store the Group Memo.
≠ AMS ±
I / u
+100