Filter
Top Products
Playing CDs
8
EN
Replacing Discs While Playing
a Disc
You can open the disc tray while playing a disc so that
you can check what discs are to be played next and
replace discs without interrupting playback of the
current disc.
EX-CHANGE DISC SKIP
1 Press EX-CHANGE.
“EX-CHANGE” appears in the display. The disc
tray opens and two disc compartments appear.
Even if the player is playing a disc, it doesn’t stop
playing.
2 Replace discs in the compartments with new ones.
The player plays the disc on the left side
compartment after the current disc, and then the
one on the right side compartment.
3 Press DISC SKIP.
The disc tray turns and other two disc
compartments appear.
4 Replace discs in the compartments with new ones.
5 Press EX-CHANGE.
The disc tray closes.
Notes
• If the playback of the current disc ends while the disc tray is
open, the player stops playing. If the disc is played in
1␣ DISC Repeat mode (see page 10), the current disc starts
playing again.
• In ALL DISCS Shuffle Play mode (see page 10), tracks are
reshuffled on the current disc, while the disc tray is open.
• In Programme Play mode (see page 11), only the tracks on
the current disc are played.
• Do not push the disc tray to close it in Step 5, as you may
damage the player.
Locating a Specific Disc
You can locate any disc before or while playing a disc.
(
DISC 1 – 5
DISC SKIP
DISC SKIP
DISC 1 – 5
MUSIC SCAN
(
RM-D645 for CDP-CA9ES
(
RM-D515 for CDP-CA8ES
DISC SKIP
DISC 1 – 5
MUSIC SCAN
To locate
The next disc
A specific disc directly
A disc by scanning the first
track of each disc for 10
seconds (Music Scan)
You can extend the playing time during Music Scan
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Press
DISC SKIP while playing a disc
DISC 1 – 5
MUSIC SCAN before you start
playing in ALL DISCS
Continuous Play mode. When
you find the disc you want,
press ( to start playing.