Filter
Top Products
Playing CDs
11
EN
Creating Your Own
Programme (Programme Play)
You can arrange the order of the tracks on the discs
and create your own programme. The programme can
contain up to 32 tracks.
( PROGRAMDISC 1 – 5
Number buttons >10
2 Press DISC 1 – 5 to select the disc.
p
PROGRAM
>20
DISC 1 – 5
Number
buttons
CLEAR
p
(
RM-D645 for CDP-CA9ES
CHECK
CLEAR
Number
buttons
DISC 1 – 5
PROGRAM
>20
CHECK
(
p
1 Press PROGRAM.
“PROGRAM” appears in the display.
If a programme is already stored, the last step of
the programme appears in the display. When you
want to erase the whole programme, hold down
CLEAR on the remote until “ALL␣ CLEAR”
appears in the display (see page 12).
12345
DISC
PROGRAM
TRACK
MIN SEC
12345
678910
A
“AL” in the display stands for “all” tracks.
When you want to programme the whole disc as
one step, skip Step 3 and go to Step 4.
3 Press the number buttons of the tracks you want to
programme in the order you want.
To programme the track numbered over 10 (or 20
when using the remote), use the >10 button (or >20
on the remote) (see page 9).
RM-D515 for CDP-CA8ES
After one second
Total playing time
12345
DISC
PROGRAM
TRACK STEP
25
8
A
12345
DISC
PROGRAM
TRACK
MIN SEC
25
8
A
Playing order
Last programmed track
Programmed
tracks
If you’ve made a mistake
Press CLEAR on the remote, then press the correct
number button.
4 To programme other discs or tracks, do the
following:
To programme
Other discs
Other tracks on the same disc
Other tracks on other discs
5 Press ( to start Programme Play.
To cancel Programme Play
Press CONTINUE.
Repeat Step(s)
2
3
2 and 3