Filter
Top Products
Recording From CDs
13
EN
Recording From CDs
Recording Your Own
Programme
You can record the programme you’ve created on a tape,
DAT or MD. The programme can contain up to 32 tracks.
By inserting a pause during programming, you can
divide the programme into two for recording on both
sides of a tape.
Fading In or Out
You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
Number
buttons
FADER
RM-D645 for CDP-CA9ES
FADER
RM-D515 for CDP-CA8ES
Number
buttons
To
Start play fading in
End play fading out
Changing the fading time
You can change the fading time from 2 to 10 seconds
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.
1 Press FADER before you start playing.
“FADE 5 SEC” appears in the display.
2 While the fading time “5” is flashing, press the
number button to specify the fading time.
Press FADER
During pause. The Q indication
flashes and play fades in.
When you want to start fading out.
The q indication flashes. The play
fades out and the player pauses.
DISC 1 – 5 ( PROGRAM
Number buttons >10 P
1 Create your programme (for side A when
recording on a tape) while checking the total
playing time indicated in the display.
Follow Steps 1 to 4 in “Creating Your Own
Programme” on page 11.
The
A
indication appears in the display.
2 When you record on both sides of the tape, press
P to insert a pause.
The “P” and
A B
indications appear in the display
and the playing time is reset to “0.00.”
When you record on one side of the tape or on a
DAT or MD, skip this step and go to Step 4.
A pause is counted as one track
You can programme up to 31 tracks when you insert a
pause.
3 Repeat Steps 2 to 4 in “Creating Your Own
Programme” on page 11 to create the programme
for side B.
4 Start recording on the deck and then press ( on
the player.
When you record on both sides of the tape, the
player pauses at the end of the programme for side
A.
5 When you record on side B, reverse the tape and
press ( or P on the player to resume playing.
You can check the total playing time while
programming (Programme Edit)
To select a track, press ≠ or ± and check the total
playing time. Then press PROGRAM to confirm your
selection.
To check and change your programme
See page 12.
The
A
indication appears while checking the
programme for side A and
B
while checking the
programme for side B.