Filter
Top Products
45
Note on mechanical noise
The recorder gives off mechanical noise while
operating, which is caused by the power-saving
system of the recorder and it is not a problem.
On cleaning
• Clean the recorder casing with a soft cloth
slightly moistened with water or a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent such
as alcohol or benzene as it may mar the finish
of the casing.
• Wipe the disc cartridge with a dry cloth to
remove dirt.
• Dust on the lens may prevent the unit from
operating properly. Be sure to close the disc
compartment lid after inserting or ejecting an
MD.
• To obtain the best sound quality, use a dry
cloth to wipe the plug of the headphones/
earphones. Dirty plug may cause sound
distortion or intermittent breaks in the sound.
Note on maintenance
Clean the terminals periodically with a cotton
swab or a soft cloth as illustrated.
On the battery compartment
lid
The battery compartment lid is designed to
detach from the recorder when it is handled
with great force. Do the following steps to
reattach the lid.
1 Insert the projections on the PUSH OPEN
tab firmly into the slots on the recorder one
at a time.
2 Insert the projections on the lid firmly into
the slots on the PUSH OPEN tab one at a
time.
Terminals
Projections
Slots
2
1