Sony MZ-NH600D MiniDisc Player User Manual


 
44
model name1[MZ-NH600D] model name2[MZ------]
[3-266-467-11(1)]
masterpage:Left
filename[D:\WW08\MORO\3266467111\3266467111MZNH600DU\01GB-
MZNH600DU\040OPE.fm]
You cannot operate
the player (“PC –
–MD” appears).
You cannot operate the player while the player is connected to the
computer.
Symptom Cause/Remedy
Others
Symptom Cause/Remedy
Some menu items
cannot be displayed.
“Menu Mode” is set to “Simple”.
, Set the “Menu Mode” to “Advanced” to display all the menu
items.
The player does not
work or works
poorly.
The volume is low.
, Turn up the volume.
No disc is inserted.
, Insert a recorded disc.
The HOLD function is turned on (“HOLD” appears in the display
when you press an operation button on the player).
, On the player, disable HOLD by sliding the HOLD switch to the
opposite direction of the arrow
(pages 14, 15).
The lid is not firmly closed.
, Close the lid until it clicks. Then slide OPEN to open the lid.
Moisture has condensed inside the player.
, Take the disc out and leave the player in a warm place for several
hours until the moisture evaporates.
The dry battery is weak (“LOW BATTERY” flashes or nothing
appears).
, Replace the dry battery with a new one.
The disc is damaged or does not contain proper recording or editing
data.
, Reinsert the disc. If the error message still appears, replace it with
another disc.
There is a built-in malfunction in the system.
While operating, the player received a mechanical shock, too much
static, abnormal power voltage caused by lightning, etc.
, Restart the operation as follows.
1 Disconnect all the power sources and the dedicated USB cable.
2 Leave the player for about 30 seconds.
3 Connect the power source.
The display window
is not normal.
The player was disconnected from the power source.
, Let the player sit for a while, or disconnect the power source,
reconnect it, and then press any of the operation buttons.
020REG.book Page 44 Wednesday, March 31, 2004 5:41 PM