Filter
Top Products
model name1[MZ-NH600D] model name2[MZ------]
[3-266-467-11(1)]
masterpage:Right
filename[D:\WW08\MORO\3266467111\3266467111MZNH600DU\01GB-
MZNH600DU\040OPE.fm]
43
While the player is connected to the computer
Symptom Cause/Remedy
The player is not
recognized by the
computer.
• The dedicated USB cable is not firmly connected.
, Connect the dedicated USB cable firmly to the player and the
computer.
• A USB hub is used.
, Connect the dedicated USB cable directly to the USB port of the
computer.
• Network communication has failed.
, Disconnect the dedicated USB cable, wait at least 2 seconds, and
then reconnect it. If the player is still not recognized, disconnect the
dedicated USB cable, restart the computer, and then connect the
dedicated USB cable again
Even though the
player is recognized
by the computer, it
does not operate
normally.
• A USB hub is used.
, Connect the dedicated USB cable directly to the USB port of the
computer.
• You are using the player at a place with vibration.
, Use the player at a place with no vibration.
The player cannot
be used as a storage
device.
• The SonicStage or MD Simple Burner software is active.
, Close the SonicStage or MD Simple Burner software.
• A standard disc is inserted.
, Insert a disc used in Hi-MD mode. Only discs used in Hi-MD mode
can be used as a storage media.
The playing time of
a transferred track is
different from the
time that appears on
your computer
monitor.
This is due to a calculation discrepancy between the recorder and the
computer.
You cannot transfer
tracks that will fill
up the remaining
recording time on
the disc.
• The minimum recordable time on a disc is normally 2 seconds in
stereo, 4 seconds in LP2 stereo mode, and 8 seconds in LP4 stereo
mode. When you transfer a track from your computer, the player needs
a 2-second (or 4- or 8-second) space for a track even if the track is
under 2 seconds (or 4 or 8 seconds) in length. Also, the player inserts a
2-second (or 4 -or 8-second) space in between tracks during transfer
operation. For this reason, the player needs an additional 6 seconds (or
12 or 24 seconds) for each track. This reduces the maximum recording
time for each track by 6 seconds (or 12 or 24 seconds) during transfer
operation (in MD mode only).
The disc size
displayed on the
computer is not the
same as the disc
size printed on the
disc.
• The difference is due to the use of the binary system to indicate the disc
size on the computer and the decimal system to express the disc size on
the disc and other recording media. For details on the disc size, see
page 37.
continued
020REG.book Page 43 Wednesday, March 31, 2004 5:41 PM