Sony MHC-S3 Stereo System User Manual


 
27
Other Features
Do this
Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote) and press O or o
repeatedly to select the
respective mode (“DAILY 1”
or “DAILY 2”), then press
ENTER (A/V amplifier or
remote).
Start over from step 1.
Press TIMER SELECT (or
CLOCK/TIMER SELECT on
the remote) and press O or o
repeatedly to select “TIMER
OFF”, then press ENTER (A/V
amplifier or remote).
Notes
If the power is on at the preset time, the Daily
Timer does not work.
When you use the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
The power turns on 15 seconds before the preset
time.
5 Set the time to start playback.
Press O or o repeatedly to set the hour, then
press ENTER (A/V amplifier or remote).
The minute indication flashes.
Press O or o repeatedly to set the minutes,
then press ENTER (A/V amplifier or
remote).
The hour indication flashes again.
6 Set the time to stop playback following
step 5.
7 Press O or o repeatedly until the music
source you want appears.
The indications change as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8 Press ENTER (A/V amplifier or remote).
The type of timer (“DAILY 1” or “DAILY
2”), followed by the start time, stop time
and the music source, appears, then the
original display appears.
9 Turn off the power.
To
Check the setting
Change the setting
Cancel the Daily
Timer