Filter
Top Products
28
GB
Selecting the surround
effect
Press CINEMA SPACE on the remote
repeatedly to turn the surround effect on
or off.
Each time you press the button, the display
changes as follows:
C.SPACE LOW* t C.SPACE MID* t
C.SPACE HIGH* t SURR ON (on) t
SURR OFF (off)
* CINEMA SPACE is the surround effect for movies.
Note
When you select other sound effects, the surround
effect will be canceled.
Selecting the surround
system
(MHC-RV6 only)
Press SURROUND SPEAKER MODE to
select the sound mode you want.
LINK : Reproduces the same sound with the
different output level.
MATRIX SURR : Reproduces only the
reverberation components with the vocals
removed.
Note
The MHC-RV5 remote has the above button, but the
function is inactive.
Display
Turning off the display
— Power Saving Mode
The demonstration display (display window
and buttons lighting and flashing even when
the system power is off) and the clock display
can be turned off to minimize the amount of
power consumed during standby (Power
Saving Mode).
Press DISPLAY repeatedly while the
system is off until the demonstration
display or the clock display disappears.
To cancel the Power Saving Mode
Press DISPLAY while the system is off. Each
time you press the button, the display switches
cyclically as follows:
Demonstration display t Clock display* t
No display (Power Saving Mode)
* The clock is displayed only if you set the clock.
Tip
The timer continues to operate in Power Saving
Mode.
Note
You cannot perform the following operations in
Power Saving Mode.
— setting the clock
— changing the AM tuning interval
— turning on the system by pressing the function
buttons
— switching the MD (VIDEO) function