22
GB
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 20).
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press . or > (or PRESET – or + on
the remote) repeatedly to select the
desired preset station.
Preset number Frequency
Listening to non-preset radio
station
— Manual Tuning
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press – or + (or TUNING – or + on the
remote) repeatedly to tune in the
desired station.
Tips
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.
• To improve broadcast reception, adjust the supplied
antennas.
• Press and hold – or + (or TUNING – or + on the
remote). The frequency indication changes and
scanning stops when the system tunes in a station
(Automatic Tuning).
• To record from the radio, see “Recording to a tape”
on page 24 or “Timer-recording radio programs” on
page 25.
Note
When “CD” is selected as the current function and
TUNER/BAND is pressed to select “TUNER”, it may
take some time to switch the function.