Filter
Top Products
The CD Player
29
3 Press INPUT.
4 Turn SELECTOR until the character
you want appears.
The cursor disappears and the first space for
the disc title flashes.
You can input the following
characters:
• Upper cases (A – Z)
• Numbers (0 – 9)
• Symbols ( ⁄ + , – < > @ [ \ ] _ ` )
To select characters on the
system
Turn SELECTOR to the counter-clockwise
or clockwise.
To select characters on the
remote
Press V or v until the type of character you
want appears, then press B or b to select the
character you want.
ALL
1
DISC
S
PROGRAM
SHUFFLE
REPEAT
1
TEXT
DELETE
FILE
DISCGROUP SYNC TRACK ART MONO STEP
STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB
TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz
1
2
REC
SLEEP
VOLUME
2 3 4 5
5 Press > to enter the character.
The cursor shifts to the right and waits for
input of the next character.
ALL
1
DISC
S
PROGRAM
SHUFFLE
REPEAT
1
TEXT
DELETE
FILE
DISCGROUP SYNC TRACK ART MONO STEP
STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB
TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz
1
2
REC
SLEEP
VOLUME
2 3 4 5
6 Repeat steps 4 and 5 to input additional
characters.
If you made a mistake
Press . or > to move the cursor to the
position you want to correct, then turn
SELECTOR to select the appropriate
character or press DELETE to remove the
character.
Labeling a CD
— Disc Memo
You can label each disc using up to 11 characters.
When you select a CD-TEXT disc, the first 11
characters of the disc title are stored as a disc
memo. Whenever you select the labeled CD, the
label (Disc Memo) appears in the display.
5
1
3
2,4
7
DELETECLEAR
.
1 Press FUNCTION repeatedly until
“CD” appears.
2 Turn SELECTOR until the disc number
you want to label appears.
When you label a disc with the front cover
closed, the disc number of the disc at the
playing position appears.
When you label a disc with the front cover
open, the disc number at the loading position
appears.
continued