Filter
Top Products
26
Programming the CD tracks
(continued)
To You need to
Check the program Press CHECK repeatedly.
After the last track, “–END–”
appears.
Clear a specific
Playing your favorite CD
independently
— Plus One Play
When you insert a disc into the PLUS ONE slot,
you can play the disc independently from other
discs. When using this function, the system is
automatically set to the 1 DISC play mode.
13 2,5
1 Press FUNCTION repeatedly until
“CD” appears in the display.
2 Open the front cover.
3 Press CD PLUS ONE.
“PLUS ONE” appears.
ALL
1
DISC
S
PROGRAM
SHUFFLE
REPEAT
1
TEXT
DELETE
FILE
DISCGROUP SYNC TRACK ART MONO STEP
STEREO
GROUP
FILE
PLUS ONE
DOLBY NR RELAY
NEXT
CD TEXT
HI-LIGHT
DBFB
TUNED
MANUAL
AUTO
PRESET
SUR
1
kHz
MHz
1
2
REC
SLEEP
VOLUME
2 3 4 5
Press CHECK until the track or
disc you want appears, then press
CLEAR.
Tips
• When you press CD H S, you can play the same
program again.
• When you press PROGRAM during Normal or
Shuffle Play, the program will be played after the
current track.
• If you replace discs, the programmed disc and track
numbers remain until you erase them. So, the
system plays only the existing disc and track
numbers. However, the disc and track numbers that
are not found in the system or on the disc are
deleted from the program, and the rest of the
program is played in the programmed order.
track or disc
Clear from the last
track or disc
Press CLEAR. Each time you
press the button, the last track or
disc will be cleared.
Clear the entire
program
Press and hold CLEAR until
“CLEAR” is displayed.
Add tracks or discs
to the end of the
program
Follow the programming
procedure.