Filter
Top Products
7
n
Step 3: Presetting
radio stations
You can preset up to 40 stations, 20 for FM, 10
for MW and 10 for SW. For South American,
Australian and Thai models, you can preset
up to 30 stations, 20 for FM and 10 for AM.
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
South American, Australian and Thai
models:
FM ˜ AM
Other models:
FM n MW n SW
2 Press TUNING MODE repeatedly to
select “AUTO”.
3 Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
12
4
63,5
Æ‚
⁄
„
0)
POWER
TUNED
STEREO
MHz
VOLUME
AUTO
5 Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
Note
When setting the time, set the equalizer display to
anything other than Spectrum analyzer pattern 3
(see “To change the equalizer display” on page 31).
continued